This change mainly extends `clFillImage` and `clCopyImage` test function
to include memory flags to be used during creating the image instead of
hard-coding these values. The memory flags are also different parameters
for source and destination images in `clCopyImage` tests.
---------
Signed-off-by: Michael Rizkalla <michael.rizkalla@arm.com>
1. Remove duplicate `create_image` code that is in both clFillImage and
clCopyImage test directories.
2. Unify how pitch buffer's memory is deallocated; The buffer can be
allocated with either `malloc` or `align_malloc` and the free function
is pre-set in `pitch_buffe_data`'s member variable `free_fn` and used
when the buffer is deallocated. With this, the change removes
`is_aligned` conditional variable that was used to select the
appropriate free function.
Signed-off-by: Michael Rizkalla <michael.rizkalla@arm.com>
Images with a `CL_UNSIGNED_INT_RAW10_EXT` and
`CL_UNSIGNED_INT_RAW12_EXT` data type are unnormalised, so the
normalised tests with theses images are invalid and will be skipped.
Signed-off-by: Gorazd Sumkovski <gorazd.sumkovski@arm.com>
Signed-off-by: Xin Jin <xin.jin@arm.com>
Co-authored-by: Gorazd Sumkovski <gorazd.sumkovski@arm.com>
This commit links to issue (#2234).
When cross-compiling for AArch64, using gcc 13.3, you encounter three
warnings types that turn into errors:
- maybe-uninitialized
- stringop-truncation
- strict-aliasing
This commit fixes all the warnings found, in regards to the first two
rules. To resolve the warnigns due to strict-aliasing, I am editing the
CMake build system.
Signed-off-by: Antonios Christidis <a-christidis@ti.com>
This change fixes the following issues when running `clCopyImage` test
with `use_pitches` flag for 1D buffer images.
1. Query device CL version using `get_device_cl_version` rather than
using `CL_DEVICE_VERSION`. Previously, using `char` may not be enough to
store the return value.
2. Pass `host_ptr` to `clCreateBuffer` when creating the buffer for the
1D image. `host_ptr` may not be `nullptr` if use_pitches flag is used.
Also, `buffer_flags` will contain `CL_MEM_USE_HOST_PTR` which requires a
host pointer to be passed.
3. Conditionally use the `host_ptr` when calling `clCreateImage`, it
will not be used with 1D image buffer. This is made to align with the
spec, in which if `mem_flags` has `CL_MEM_USE_HOST_PTR` a host pointer
must be present, but if the memory flag is not present, host pointer
must be `nullptr`.
4. Use the correct free function `free` and `align_free` based on the
allocation function that was used.
Signed-off-by: Michael Rizkalla <michael.rizkalla@arm.com>
Printing of a `size_t` requires the `%zu` specifier.
This fixes occurrences where the previous wrong specifier appears to
work in a typical 64-bit build, but causes a Wformat warning in 32-bit
builds.
---------
Signed-off-by: Sven van Haastregt <sven.vanhaastregt@arm.com>
test_copy_1D.cpp: num_mip_levels is a cl_uint, so don't cast and just
print using `%u`.
test_pipe_info.cpp: arg_type_qualifier is a 64-bit wide bitfield, so
print in hexadecimal format using the correct length modifier.
test_device_partition.cpp: it is not clear what the bit width of
`cl_device_partition_property` should be, so cast the operands to align
with the format specifiers.
Signed-off-by: Sven van Haastregt <sven.vanhaastregt@arm.com>
All existing tests in `test_image_streams`, that are capable of testing
image formats using the `CL_UNORM_INT_2_101010_EXT` data type, do so.
Signed-off-by: Gorazd Sumkovski <gorazd.sumkovski@arm.com>
Some conformance tests use directly the size returned by the runtime
for max memory size to allocate buffers.
This doesn't leave enough memory for the system to run the tests.
The kernel_read_write tests have a lot of duplicate code. These are the
next steps to reducing the duplication, by using the functions in
test_common.cpp as common for 1D, 1D array and 2D array.
---------
Signed-off-by: Ellen Norris-Thompson <ellen.norris-thompson@arm.com>
Co-authored-by: Ahmed Hesham <117350656+ahesham-arm@users.noreply.github.com>
The main sources of warnings were:
* Printing of a `size_t` which requires the `%zu` specifier.
* Printing of 64-bit values which is now done using the `PRI*64` macros
to ensure portability across 32 and 64-bit builds.
* Calling log_error with a format string of `"%f %f %f %f"` but
specifying only three arguments.
Signed-off-by: Sven van Haastregt <sven.vanhaastregt@arm.com>
The Image_from_buffer_alignment_negative test creates images with
incorrect pitches by adding 1 and tests whether the image creation
fails.
Devices that return 1 for either of
CL_IMAGE_REQUIREMENTS_ROW_PITCH_ALIGNMENT_EXT,
CL_IMAGE_REQUIREMENTS_SLICE_PITCH_ALIGNMENT_EXT or
CL_IMAGE_REQUIREMENTS_BASE_ADDRESS_ALIGNMENT_EXT will successfully
create the image and therefore fail the test.
This change allows to skip the image creation in this case as the error
condition (pitch % pitch_alignment != 0) will not be triggered for these
devices.
* cl_copy_images
* cl_get_info
* cl_fill_image
* cl_read_write_image
* kernel_image_methods
* IMAGE1D_BUFFER cannot be created with (USE_|ALLOC_|COPY_)_HOST_PTR
* do not allow mipmap with 1D buffer
* adjust M to be within maximum_sizes and max_pixels
* remove unused variables
* make sure M will never be 0
* fix region[0] after refactoring removing mipmap
* fix formatting
* format with clang-format-11
* fix image1d_buffer creation with gEnablePitch
* add missing case in switch
* use align_malloc when CL version is at least 2.0
* use CL_DEVICE_NUMERIC_VERSION and align_free
* fix free of pitch buffer
* fix formatting
* fix formatting
* fix data->is_aligned
This function (do_test) starts by testing write and read individually.
Both of them can have errors.
When readwrite image is not supported, the function returns
TEST_SKIPPED_ITSELF potentially masking errors leading to the test
returning EXIT_SUCCESS even with errors along the way.
* Replace OBSOLETE_FORAMT with OBSOLETE_FORMAT
In imageHelpers.cpp and few other places in image tests, OBSOLETE_FORMAT is misspelled as OBSOLETE_FORAMT.
Fix misspelling by replcaing it with OBSOLETE_FORMAT.
Fixes#1769
* Remove code guarded by OBSOLETE_FORMAT
Remove code guarded by OBSOLETE_FORMAT
as suggested by review comments
Fixes#1769
* Fix formating issues for OBSOLETE_FORMAT changes
Fix formatting issues observed in files while removing
code guarded by OBSOLETE_FORMAT
Fixes#1769
* Some more formatting fixes
Some more formatting fixes to get CI clean
Fixes#1769
* Final Formating fixes
Final formatting fixes for #1769
Only check against 2D image types as per the spec.
Move some device checks out of the loop.
Only perform the checks when element_size is a power of two.
Signed-off-by: John Kesapides <john.kesapides@arm.com>
The verification uses a common function with nested loops to verify
the result of the copy operation. The upper loop limits thirdDim and
SecondDim should be set according to the image type under test. Previously
for 1D/2D they were set from dstImageInfo->depth and dstImageInfo->height.
The issue is that the depth and height are set to 0 when unused. This
caused the verification loop to be skipped.
Signed-off-by: John Kesapides <john.kesapides@arm.com>
Only disable `-Wsign-compare` for tests that do not compile cleanly
with this warning enabled. Re-enable the warning for the other tests,
so that it can catch any new occurrences.
Signed-off-by: Sven van Haastregt <sven.vanhaastregt@arm.com>
Some new extension formats require the width to be a multiple
of 4 or 2 (see cl_ext_image_raw10_raw12).
Change has not functional impact as the affected image is only used
for generic queries.
Signed-off-by: John Kesapides <john.kesapides@arm.com>
Names that begin with an underscore followed by an uppercase letter
are reserved for the C++ implementation.
Signed-off-by: Sven van Haastregt <sven.vanhaastregt@arm.com>
All of these if-else chains compare against enums, which is better
done using switch statements. This helps avoid some
`-Wsometimes-uninitialized` warnings of variables that are assigned
inside the switch.
Signed-off-by: Sven van Haastregt <sven.vanhaastregt@arm.com>
Only disable `-Wunused-but-set-variable` for tests that do not compile
cleanly with this warning enabled. This re-enables the warning for
most other tests, so that it can catch any new occurrences.
Signed-off-by: Sven van Haastregt <sven.vanhaastregt@arm.com>
Rebase of my previous clGetImageRequirementsInfoEXT flag=0 fix PR: PR1632
Pass 'flag' variable through to clGetImageRequirementsInfoEXT:
Almost all of the image_from_buffer cl_ext_image_requirements_info tests pass '0' as the 'flags' to clGetImageRequirementsInfoEXT.
Passing '0' as the flags is valid according to the spec, but since the tests are calling clGetImageRequirementsInfoEXT in a loop over a list of flags it doesn't seem intended that all the tests pass '0'.
Fixed CL_MEM_KERNEL_READ_AND_WRITE flag override:
The mem_flags override for CL_MEM_KERNEL_READ_AND_WRITE was incorrectly affecting subsequent iterations of the image_format loop.
Fixed by using a separate variable inside the loop.
* Don't recalculate image parameters repeatedly in `test_read_image()`
We've already done this in the loop. There's no need to recalculate
those parameters over and over again in `sample_image_pixel*()` and
`read_image_pixel*()`. This should save some work during the image
streams test.
This only affects the 3D tests for now, but my time profiles indicate
this is where we spend the most time anyway.
* Vectorize read_image_pixel_float() and sample_image_pixel_float() for SSE/AVX
This shortens the image streams test time from 45 minutes without it to
37 minutes. Unfortunately, most of the time is now spent waiting for
memory, particularly in the 3D tests, because the 3D image doesn't
neatly fit in the cache, especially in the linear sampling case, where
pixels from two 2D slices must be sampled. Software prefetching won't
help; it only helps when execution time is dominated by operations, but
this is dominated by memory access. Randomized offsets are likely a
factor, because they throw off the hardware prefetcher.
One possible further optimization is, in the linear sampling case, to
load two sampled pixels at once. This is easy to do using AVX, which
extends SSE with 256-bit vectors.
Obviously, this only applies to x86 CPUs with SSE2. The greatest
performance gains, however, are seen with SSE4.1. Most modern x86 CPus
have SSE4. Work is needed to support other CPUs' vector units--ARM
Advanced SIMD/NEON is probably the most important one. Another
possibility is arranging the code so that the compiler's
autovectorization will kick in and do what I did here manually.
Move functions in .h files to .cpp files where appropriate; align
prototypes and definitions; and remove functions that are not used.
Signed-off-by: Sven van Haastregt <sven.vanhaastregt@arm.com>
Signed-off-by: Sven van Haastregt <sven.vanhaastregt@arm.com>
So we get finer grain reporting and better parallelisation in the future.
Signed-off-by: Kévin Petit <kpet@free.fr>
Signed-off-by: Kévin Petit <kpet@free.fr>
Also use log_info instead of printf for skipped tests, for consistency.
Signed-off-by: Stuart Brady <stuart.brady@arm.com>
Signed-off-by: Stuart Brady <stuart.brady@arm.com>
Fix a few instances where an incorrect number of arguments was
supplied when calling (v)log_error.
Signed-off-by: Sven van Haastregt <sven.vanhaastregt@arm.com>
Signed-off-by: Sven van Haastregt <sven.vanhaastregt@arm.com>
* Fix enqueue_flags test to use correct barrier type.
Currently, enqueue_flags test uses CLK_LOCAL_MEM_FENCE.
Use CLK_GLOBAL_MEM_FENCE instead as all threads across work-groups
need to wait here.
* Add check for support for Read-Wrie images
Read-Write images have required OpenCL 2.x.
Read-Write image tests are already being skipped
for 1.x devices.
With OpenCL 3.0, read-write images being optional,
the tests should be run or skipped
depending on the implementation support.
Add a check to decide if Read-Write images are
supported or required to be supported depending
on OpenCL version and decide if the tests should
be run on skipped.
Fixes issue #894
* Fix formatting in case of Read-Write image checks.
Fix formatting in case of Read-write image checks.
Also, combine two ifs into one in case of
kerne_read_write tests
* Fix some more formatting for RW-image checks
Remove unnecessary spaces at various places.
Also, fix lengthy lines.
* Fix malloc-size calculation in test imagedim
unsigned char size is silently assumed to be 1
in imagedim test of test_basic.
Pass sizeof(type) in malloc size calculation.
Also, change loop variable from signed to unsigned.
Add checks for null pointer for malloced memory.
* Cap CL_DEVICE_MAX_MEM_ALLOC_SIZE to SIZE_MAX
Cap CL_DEVICE_MAX_MEM_ALLOC_SIZE to SIZE_MAX
when CL_DEVICE_GLOBAL_MEM_SIZE is capped with SIZE_MAX.
test_allocation caps the value of GLOBAL_MEM_SIZE to SIZE_MAX
if it exceeds the value of SIZE_MAX(value depends on platform bitness),
but doesn’t modify MAX_ALLOC_SIZE the same way.
Due to this MAX_ALLOC_SIZE becomes greater than GLOBAL_MEM_SIZE
and the test fails.
Modify MAX_MEM_ALLOC_SIZE as GLOBAL_MEM_SIZE when it exceeds SIZE_MAX
OpenCL-CTS #1022
* Make InitFloatCoords suitable for all image types
Contributes #616
* Create common functions neutral for image types
Remove 3D specific code from common test_read_image so using
it for other image types is simpler in following patches
Contributes #616
* Removing unused code
Tidying commented out or unnecessary code
Contributes #616
Signed-off-by: Ellen Norris-Thompson <ellen.norris-thompson@arm.com>
* Restoring 'lod' variable name
Contributes #616
* Default cases to handle unsupported image types
Contributes #616
* Resolving build issues
Contributes #616
* Fix formatting
Contributes #616
* Using TEST_FAIL as an error code.
Contributes #616
* Add static keyword, improve error handling
Contributes #616
* Fix build errors with least disruption
Contributes #616
Signed-off-by: Ellen Norris-Thompson <ellen.norris-thompson@arm.com>
Factor out a macro to set module-specific compilation flags for
GNU-like compilers. This simplifies setting compilation flags per
test.
Signed-off-by: Sven van Haastregt <sven.vanhaastregt@arm.com>
Signed-off-by: Sven van Haastregt <sven.vanhaastregt@arm.com>
Remove unused variables throughout the code base and enable the
`-Wunused-variable` warning flag globally to prevent new unused
variable issues being introduced in the future.
This is mostly a non-functional change, with one exception:
- In `test_conformance/api/test_kernel_arg_info.cpp`, an error check
of the clGetDeviceInfo return value was added.
Signed-off-by: Sven van Haastregt <sven.vanhaastregt@arm.com>
The slice pitch/padding calculation assumed that the 'height' variable contained the pixel height of the image, which it doesn't for IMAGE1D_ARRAY.
Fixes#1257
