* allocations: Move results array from stack to heap (#1857)
* allocations: Fix stack overflow
* check format fixes
* Fix windows stack overflow. (#1839)
* thread_dimensions: Avoid combinations of very small LWS and very large GWS (#1856)
Modify the existing condition to include extremely small LWS like
1x1 on large GWS values
* c11_atomics: Reduce the loopcounter for sequential consistency tests (#1853)
Reduce the loop from 1000000 to 500000 since the former value
makes the test run too long and cause system issues on certain
platforms
* Limit individual allocation size using the global memory size (#1835)
Signed-off-by: Ahmed Hesham <ahmed.hesham@arm.com>
* geometrics: fix Wsign-compare warnings (#1855)
Signed-off-by: Sven van Haastregt <sven.vanhaastregt@arm.com>
* integer_ops: fix -Wformat warnings (#1860)
The main sources of warnings were:
* Printing of a `size_t` which requires the `%zu` specifier.
* Printing of `cl_long`/`cl_ulong` which is now done using the
`PRI*64` macros to ensure portability across 32 and 64-bit builds.
Signed-off-by: Sven van Haastregt <sven.vanhaastregt@arm.com>
* Replace OBSOLETE_FORAMT with OBSOLETE_FORMAT (#1776)
* Replace OBSOLETE_FORAMT with OBSOLETE_FORMAT
In imageHelpers.cpp and few other places in image tests, OBSOLETE_FORMAT is misspelled as OBSOLETE_FORAMT.
Fix misspelling by replcaing it with OBSOLETE_FORMAT.
Fixes#1769
* Remove code guarded by OBSOLETE_FORMAT
Remove code guarded by OBSOLETE_FORMAT
as suggested by review comments
Fixes#1769
* Fix formating issues for OBSOLETE_FORMAT changes
Fix formatting issues observed in files while removing
code guarded by OBSOLETE_FORMAT
Fixes#1769
* Some more formatting fixes
Some more formatting fixes to get CI clean
Fixes#1769
* Final Formating fixes
Final formatting fixes for #1769
* Enhancement: Thread dimensions user parameters (#1384)
* Fix format in the test scope
* Add user params to limit testing
Add parameters to reduce amount of testing.
Helpful for debugging or for machines with lower performance.
* Restore default value
* Print info only if testing params bigger than 0.
* [NFC] conversions: reenable Wunused-but-set-variable (#1845)
Remove an assigned-to but unused variable.
Reenable the Wunused-but-set-variable warning for the conversions
suite, as it now compiles cleanly with this warning enabled.
Signed-off-by: Sven van Haastregt <sven.vanhaastregt@arm.com>
* Fix bug of conversion from long to double (#1847)
* Fix bug of conversion from long to double
It the input is long type, it should be load as long type, not ulong.
* update long2float
* math_brute_force: fix exp/exp2 rlx ULP calculation (#1848)
Fix the ULP error calculation for the `exp` and `exp2` builtins in
relaxed math mode for the full profile.
Previously, the `ulps` value kept being added to while verifying the
result buffer in a loop. `ulps` could even become a `NaN` when the
input argument being tested was a `NaN`.
Signed-off-by: Sven van Haastregt <sven.vanhaastregt@arm.com>
* Enable LARGEADDRESSAWARE for 32 bit compilation (#1858)
* Enable LARGEADDRESSAWARE for 32 bit compilation
32-bit executables built with MSVC linker have only 2GB virtual memory
address space by default, which might not be sufficient for some tests.
Enable LARGEADDRESSAWARE linker flag for 32-bit targets to allow tests
to handle addresses larger than 2 gigabytes.
https://learn.microsoft.com/en-us/cpp/build/reference/largeaddressaware-handle-large-addresses?view=msvc-170
Signed-off-by: Guo, Yilong <yilong.guo@intel.com>
* Apply suggestion
Co-authored-by: Ben Ashbaugh <ben.ashbaugh@intel.com>
---------
Signed-off-by: Guo, Yilong <yilong.guo@intel.com>
Co-authored-by: Ben Ashbaugh <ben.ashbaugh@intel.com>
* fix return code when readwrite image is not supported (#1873)
This function (do_test) starts by testing write and read individually.
Both of them can have errors.
When readwrite image is not supported, the function returns
TEST_SKIPPED_ITSELF potentially masking errors leading to the test
returning EXIT_SUCCESS even with errors along the way.
* fix macos builds by avoiding double compilation of function_list.cpp for test_spir (#1866)
* modernize CMakeLists for test_spir
* add the operating system release to the sccache key
* include the math brute force function list vs. building it twice
* fix the license header on the spirv-new tests (#1865)
The source files for the spirv-new tests were using the older Khronos
license instead of the proper Apache license. Fixed the license in
all source files.
* compiler: fix grammar in error message (#1877)
Signed-off-by: Sven van Haastregt <sven.vanhaastregt@arm.com>
* Updated semaphore tests to use clSemaphoreReImportSyncFdKHR. (#1854)
* Updated semaphore tests to use clSemaphoreReImportSyncFdKHR.
Additionally updated common semaphore code to handle spec updates
that restrict simultaneous importing/exporting of handles.
* Fix build issues on CI
* gcc build issues
* Make clReImportSemaphoreSyncFdKHR a required API
call if cl_khr_external_semaphore_sync_fd is present.
* Implement signal and wait for all semaphore types.
* subgroups: fix for testing too large WG sizes (#1620)
It seemed to be a typo; the comment says that it
tries to fetch local size for a subgroup count with
above max WG size, but it just used the previous
subgroup count.
The test on purpose sets a SG count to be a larger
number than the max work-items in the work group.
Given the minimum SG size is 1 WI, it means that there
can be a maximum of maximum work-group size of SGs (of
1 WI of size). Thus, if we request a number of SGs that
exceeds the local size, the query should fail as expected.
* add SPIR-V version testing (#1861)
* basic SPIR-V 1.3 testing support
* updated script to compile for more SPIR-V versions
* switch to general SPIR-V versions test
* update copyright text and fix license
* improve output while test is running
* check for higher SPIR-V versions first
* fix formatting
* fix the reported platform information for math brute force (#1884)
When the math brute force test printed the platform version it always
printed information for the first platform in the system, which could
be different than the platform for the passed-in device. Fixed by
querying the platform from the passed-in device instead.
* api tests fix: Use MTdataHolder in test_get_image_info (#1871)
* Minor fixes in mutable dispatch tests. (#1829)
* Minor fixes in mutable dispatch tests.
* Fix size of newWrapper in MutableDispatchSVMArguments.
* Fix errnoneus clCommandNDRangeKernelKHR call.
Signed-off-by: John Kesapides <john.kesapides@arm.com>
* * Set the row_pitch for imageInfo in MutableDispatchImage1DArguments
and MutableDispatchImage2DArguments. The row_pitch is
used by get_image_size() to calculate the size of
the host pointers by generate_random_image_data.
Signed-off-by: John Kesapides <john.kesapides@arm.com>
---------
Signed-off-by: John Kesapides <john.kesapides@arm.com>
* add test for cl_khr_spirv_linkonce_odr (#1226)
* initial version of the test with placeholders for linkonce_odr linkage
* add OpExtension SPV_KHR_linkonce_odr extension
* add check for extension
* switch to actual LinkOnceODR linkage
* fix formatting
* add a test case to ensure a function with linkonce_odr is exported
* add back the extension check
* fix formatting
* undo compiler optimization and actually add the call to function a
* [NFC] subgroups: remove unnecessary extern keywords (#1892)
In C and C++ all functions have external linkage by default.
Also remove the unused `gMTdata` and `test_pipe_functions`
declarations.
Fixes https://github.com/KhronosGroup/OpenCL-CTS/issues/1137
Signed-off-by: Sven van Haastregt <sven.vanhaastregt@arm.com>
* Added cl_khr_fp16 extension support for test_decorate from spirv_new (#1770)
* Added cl_khr_fp16 extension support for test_decorate from spirv_new, work in progres
* Complemented test_decorate saturation test to support cl_khr_fp16 extension (issue #142)
* Fixed clang format
* scope of modifications:
-changed naming convention of saturation .spvasm files related to
test_decorate of spirv_new
-restored float to char/uchar saturation tests
-few minor corrections
* fix ranges for half testing
* fix formating
* one more formatting fix
* remove unused function
* use isnan instead of std::isnan
isnan is currently implemented as a macro, not as a function, so
we can't use std::isnan.
* fix Clang warning about inexact conversion
---------
Co-authored-by: Ben Ashbaugh <ben.ashbaugh@intel.com>
* add support for custom devices (#1891)
enable the CTS to run on custom devices
---------
Signed-off-by: Ahmed Hesham <ahmed.hesham@arm.com>
Signed-off-by: Sven van Haastregt <sven.vanhaastregt@arm.com>
Signed-off-by: Guo, Yilong <yilong.guo@intel.com>
Signed-off-by: John Kesapides <john.kesapides@arm.com>
Co-authored-by: Sreelakshmi Haridas Maruthur <sharidas@quicinc.com>
Co-authored-by: Haonan Yang <haonan.yang@intel.com>
Co-authored-by: Ahmed Hesham <117350656+ahesham-arm@users.noreply.github.com>
Co-authored-by: Sven van Haastregt <sven.vanhaastregt@arm.com>
Co-authored-by: niranjanjoshi121 <43807392+niranjanjoshi121@users.noreply.github.com>
Co-authored-by: Grzegorz Wawiorko <grzegorz.wawiorko@intel.com>
Co-authored-by: Wenwan Xing <wenwan.xing@intel.com>
Co-authored-by: Yilong Guo <yilong.guo@intel.com>
Co-authored-by: Romaric Jodin <89833130+rjodinchr@users.noreply.github.com>
Co-authored-by: joshqti <127994991+joshqti@users.noreply.github.com>
Co-authored-by: Pekka Jääskeläinen <pekka.jaaskelainen@tuni.fi>
Co-authored-by: imilenkovic00 <155085410+imilenkovic00@users.noreply.github.com>
Co-authored-by: John Kesapides <46718829+JohnKesapidesARM@users.noreply.github.com>
Co-authored-by: Marcin Hajder <marcin.hajder@gmail.com>
Co-authored-by: Aharon Abramson <aharon.abramson@mobileye.com>
Only check against 2D image types as per the spec.
Move some device checks out of the loop.
Only perform the checks when element_size is a power of two.
Signed-off-by: John Kesapides <john.kesapides@arm.com>
Only disable `-Wsign-compare` for tests that do not compile cleanly
with this warning enabled. Re-enable the warning for the other tests,
so that it can catch any new occurrences.
Signed-off-by: Sven van Haastregt <sven.vanhaastregt@arm.com>
Some new extension formats require the width to be a multiple
of 4 or 2 (see cl_ext_image_raw10_raw12).
Change has not functional impact as the affected image is only used
for generic queries.
Signed-off-by: John Kesapides <john.kesapides@arm.com>
Names that begin with an underscore followed by an uppercase letter
are reserved for the C++ implementation.
Signed-off-by: Sven van Haastregt <sven.vanhaastregt@arm.com>
Only disable `-Wunused-but-set-variable` for tests that do not compile
cleanly with this warning enabled. This re-enables the warning for
most other tests, so that it can catch any new occurrences.
Signed-off-by: Sven van Haastregt <sven.vanhaastregt@arm.com>
Rebase of my previous clGetImageRequirementsInfoEXT flag=0 fix PR: PR1632
Pass 'flag' variable through to clGetImageRequirementsInfoEXT:
Almost all of the image_from_buffer cl_ext_image_requirements_info tests pass '0' as the 'flags' to clGetImageRequirementsInfoEXT.
Passing '0' as the flags is valid according to the spec, but since the tests are calling clGetImageRequirementsInfoEXT in a loop over a list of flags it doesn't seem intended that all the tests pass '0'.
Fixed CL_MEM_KERNEL_READ_AND_WRITE flag override:
The mem_flags override for CL_MEM_KERNEL_READ_AND_WRITE was incorrectly affecting subsequent iterations of the image_format loop.
Fixed by using a separate variable inside the loop.
* Don't recalculate image parameters repeatedly in `test_read_image()`
We've already done this in the loop. There's no need to recalculate
those parameters over and over again in `sample_image_pixel*()` and
`read_image_pixel*()`. This should save some work during the image
streams test.
This only affects the 3D tests for now, but my time profiles indicate
this is where we spend the most time anyway.
* Vectorize read_image_pixel_float() and sample_image_pixel_float() for SSE/AVX
This shortens the image streams test time from 45 minutes without it to
37 minutes. Unfortunately, most of the time is now spent waiting for
memory, particularly in the 3D tests, because the 3D image doesn't
neatly fit in the cache, especially in the linear sampling case, where
pixels from two 2D slices must be sampled. Software prefetching won't
help; it only helps when execution time is dominated by operations, but
this is dominated by memory access. Randomized offsets are likely a
factor, because they throw off the hardware prefetcher.
One possible further optimization is, in the linear sampling case, to
load two sampled pixels at once. This is easy to do using AVX, which
extends SSE with 256-bit vectors.
Obviously, this only applies to x86 CPUs with SSE2. The greatest
performance gains, however, are seen with SSE4.1. Most modern x86 CPus
have SSE4. Work is needed to support other CPUs' vector units--ARM
Advanced SIMD/NEON is probably the most important one. Another
possibility is arranging the code so that the compiler's
autovectorization will kick in and do what I did here manually.
Move functions in .h files to .cpp files where appropriate; align
prototypes and definitions; and remove functions that are not used.
Signed-off-by: Sven van Haastregt <sven.vanhaastregt@arm.com>
Signed-off-by: Sven van Haastregt <sven.vanhaastregt@arm.com>
Also use log_info instead of printf for skipped tests, for consistency.
Signed-off-by: Stuart Brady <stuart.brady@arm.com>
Signed-off-by: Stuart Brady <stuart.brady@arm.com>
* Make InitFloatCoords suitable for all image types
Contributes #616
* Create common functions neutral for image types
Remove 3D specific code from common test_read_image so using
it for other image types is simpler in following patches
Contributes #616
* Removing unused code
Tidying commented out or unnecessary code
Contributes #616
Signed-off-by: Ellen Norris-Thompson <ellen.norris-thompson@arm.com>
* Restoring 'lod' variable name
Contributes #616
* Default cases to handle unsupported image types
Contributes #616
* Resolving build issues
Contributes #616
* Fix formatting
Contributes #616
* Using TEST_FAIL as an error code.
Contributes #616
* Add static keyword, improve error handling
Contributes #616
* Fix build errors with least disruption
Contributes #616
Signed-off-by: Ellen Norris-Thompson <ellen.norris-thompson@arm.com>
Factor out a macro to set module-specific compilation flags for
GNU-like compilers. This simplifies setting compilation flags per
test.
Signed-off-by: Sven van Haastregt <sven.vanhaastregt@arm.com>
Signed-off-by: Sven van Haastregt <sven.vanhaastregt@arm.com>
Remove unused variables throughout the code base and enable the
`-Wunused-variable` warning flag globally to prevent new unused
variable issues being introduced in the future.
This is mostly a non-functional change, with one exception:
- In `test_conformance/api/test_kernel_arg_info.cpp`, an error check
of the clGetDeviceInfo return value was added.
Signed-off-by: Sven van Haastregt <sven.vanhaastregt@arm.com>
* images: Stop checking gDeviceType != CL_DEVICE_TYPE_GPU
If the device type also advertises CL_DEVICE_TYPE_DEFAULT (which should
be valid), this causes it to be considered a CPU device and the tests
enforce different precision and rounding expectations.
* Fix clang-format
* Drop redundant NORM_OFFSET checks
* Minor fixes for CL_UNORM_SHORT_565, CL_UNORM_SHORT_555
* Fix verification for undefined bit
* Relax current infinitely precision requirement for these formats
and move check in common function.
* Add proper debug output.
Signed-off-by: John Kesapides <john.kesapides@arm.com>
* Minor Formating fix.
Signed-off-by: John Kesapides <john.kesapides@arm.com>
* Move common global variable and functions to header
InitFloatCoords for 3D read images has also been renamed
so it can later be used as a common function
Contributes #616
Signed-off-by: Ellen Norris-Thompson <ellen.norris-thompson@arm.com>
* Set-up for using 3D functions as a base
test_read_image_3D had been moved to common.cpp (and renamed
test_read_image) along with corresponding
determine_validation_error_offset and InitFloatCoords.
Only function names and the formatting have been changed.
Contributes #616
Signed-off-by: Ellen Norris-Thompson <ellen.norris-thompson@arm.com>
* Use std::vector for format lists in images suite
Avoids memory deallocation issues and generally simplifies the code.
* Fixup formatting with git-clang-format
* Tests requiring image support use runTestHarnessWithCheck
Removing special case for images in runTestHarness.
Fixes#710
* Remove imageSupportRequired argument
Tests which require image support now specify this while
calling runTestHarnessWithCheck.
Fixes#710
Signed-off-by: Ellen Norris-Thompson <ellen.norris-thompson@arm.com>
These declarations either aren't used or aren't needed, as testBase.h
already declares them.
Some definitions got moved to test_common.h, as these are duplicated
across few files. There's further opportunity to improve code reuse
via test_common.h, but that's for future patch.
Signed-off-by: Radek Szymanski <radek.szymanski@arm.com>
Fix validate_float/half_write_results so that when nan/inf is
encountered on a channel, the rest of the channel values are still
considered for correctness.
Signed-off-by: John Kesapides <john.kesapides@arm.com>
Signed-off-by: James Morrissey <james.morrissey@arm.com>
Co-authored-by: John Kesapides <john.kesapides@arm.com>
* Fix enqueue_flags test to use correct barrier type.
Currently, enqueue_flags test uses CLK_LOCAL_MEM_FENCE.
Use CLK_GLOBAL_MEM_FENCE instead as all threads across work-groups
need to wait here.
* Add check for support for Read-Wrie images
Read-Write images have required OpenCL 2.x.
Read-Write image tests are already being skipped
for 1.x devices.
With OpenCL 3.0, read-write images being optional,
the tests should be run or skipped
depending on the implementation support.
Add a check to decide if Read-Write images are
supported or required to be supported depending
on OpenCL version and decide if the tests should
be run on skipped.
Fixes issue #894
* Fix formatting in case of Read-Write image checks.
Fix formatting in case of Read-write image checks.
Also, combine two ifs into one in case of
kerne_read_write tests
* Fix some more formatting for RW-image checks
Remove unnecessary spaces at various places.
Also, fix lengthy lines.
* skip test cases rather than fail without cl_khr_3d_image_writes
cl_khr_3d_image_writes is required for OpenCL 2.x devices, but is not
required for OpenCL 1.x or OpenCL 3.0 devices. A check for the presence
of the extension on OpenCL 2.x devices already exists in
test_min_max_device_version, so we don't need any failure conditions
here, and can just skip tests if the extension is not supported.
* clang-format changes
* Enable -Werror for GCC/Clang builds
Fixes many of the errors this produces, and disables a handful that
didn't have solutions that were obvious (to me).
* Check for `-W*` flags empirically
* Remove cl_APPLE_fp64_basic_ops support
* Undo NAN conversion fix
* Add comments to warning override flags
* Remove unneeded STRINGIFY definition
* Fix tautological compare issue in basic
* Use ABS_ERROR macro in image tests
* Use fabs for ABS_ERROR macro
* Move ABS_ERROR definition to common header
This moves the filter_formats and get_format_list functions to a common
file. These functions were roughly the same, with an optional filtering
in some tests for testing mipmaps.
Signed-off-by: Radek Szymanski <radek.szymanski@arm.com>
* Allow CL_HALF_FLOAT denorm flushing for write tests (#452)
* On mismatch, add relaxation when denormal half result is expected
* Refactor to use common validation function
* Clean up some diagnostics
* Fix review comments
- use cl_half
- remove extraneous casts
- replace literals with sizeof()
* Document rollover trick for IsHalfSubnormal
Removing all references to check_opencl_version as similar
get_device_cl_version() can be used instead.
Fixes#527
Change-Id: I474b6f536033707e1beb9b5b39410de24672c040
Signed-off-by: Ellen Norris-Thompson <ellen.norris-thompson@arm.com>
* set gDeviceType in testharness.c, also moved gTestRounding to imageHelpers.cpp & .h and removed duplicate code from host_atomics.cpp
* Cleaned up some redundant code
* Reversed the change in testharness.c
* Moved all instances of gDeviceType to imageHelper.cpp
* Missed one instance of gDeviceType
* Removed all instances of extern cl_device_type gDeviceType, except in imageHelpers.h
* Require exact for match normals, instead of arbitrary .005 relative error
* Add relaxation to allow 0 when float denormal is expected
* Refactor to use common validation function
